$A$ spectrometer gives the following reading when used to measure the angle of a prism.
Main scale reading : $58.5^{\circ}$
Vernier scale reading : $09$ divisions
Given that $1$ division on the main scale corresponds to $0.5^{\circ}$. The total number of divisions on the Vernier scale is $30$,which matches $29$ divisions of the main scale. The angle of the prism from the above data is ....... . (in $^{\circ}$)

In a Vernier Calipers,$10$ divisions of the Vernier scale are equal to $9$ divisions of the main scale. When both jaws of the Vernier calipers touch each other,the zero of the Vernier scale is shifted to the left of the zero of the main scale,and the $4^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. One main scale division is equal to $1\,mm$. While measuring the diameter of a spherical body,the body is held between the two jaws. It is observed that the zero of the Vernier scale lies between $30$ and $31$ divisions of the main scale,and the $6^{\text{th}}$ Vernier scale division exactly coincides with a main scale division. The diameter of the spherical body is $.......\,cm$.

If $50$ Vernier divisions are equal to $49$ main scale divisions of a travelling microscope and one smallest reading of main scale is $0.5 \,mm$, the Vernier constant of travelling microscope is:

The internal and external diameters of a hollow cylinder measured with vernier calipers are $(5.73 \pm 0.01) \text{ cm}$ and $(6.01 \pm 0.01) \text{ cm}$ respectively. Then the thickness of the cylinder wall is

The diameter of a spherical bob is measured using a vernier callipers. $9$ divisions of the main scale,in the vernier callipers,are equal to $10$ divisions of vernier scale. One main scale division is $1\, {mm}$. The main scale reading is $10\, {mm}$ and $8^{\text{th}}$ division of vernier scale was found to coincide exactly with one of the main scale division. If the given vernier callipers has positive zero error of $0.04\, {cm}$,then the radius of the bob is $...... \,\times 10^{-2} \,{cm}$.

In an experiment with Vernier callipers of least count $0.1\,mm$,when two jaws are joined together,the zero of the Vernier scale lies to the right of the zero of the main scale and the $6^{th}$ division of the Vernier scale coincides with a main scale division. While measuring the diameter of a spherical bob,the zero of the Vernier scale lies between $3.2\,cm$ and $3.3\,cm$ marks,and the $4^{th}$ division of the Vernier scale coincides with a main scale division. The diameter of the bob is measured as $.......\,cm$.